MX2 Laser Aligner Beam Calibration level Optical Path Construction Laboratory Straight Magnetic Ruler Optical Auxiliary Tool

Product information

Characteristic

The MX2 laser aligner is a tool and instrument that can greatly improve the efficiency of optical path construction. It utilizes the characteristics of high brightness, low divergence, and high collimation of the laser. It uses the 180° divergent laser light as the reference guideline to achieve a variety of Auxiliary measurement and optical path calibration functions. Its structure and function are original.

1.Features of laser aligner

►The laser aligner can greatly improve the efficiency of optical path construction, and calibrate the parallelism, perpendicularity and optical path coaxiality;

►The laser has high brightness, small divergence and high collimation;

► 360° divergent laser light can realize a variety of auxiliary measurement and optical path calibration functions;

►Magnetic adsorption design keeps zero combination gap;

►With a special height gauge, it can accurately measure the focal height of any opto-mechanical
component;

2.Laser characteristics

►The laser is made of imported laser diodes and constant power circuit boards, with high brightness, clear light, low dispersion and high collimation;

► 360° divergent laser light can realize a variety of auxiliary measurement and optical path
calibration functions;

►Magnetic adsorption design keeps zero combination gap;

►With a special height gauge, it can accurately measure the focal height of any opto-mechanical
component;

►The shell is made of aviation aluminum-plated insulating paint, which can fully dissipate heat, and
is also shock-proof, anti-drop, anti-static, high-temperature and corrosion-resistant;

3.Characteristics of magnetic beam collimator

►Used for beam collimation and height measurement;

►Metric laser scale, total scale length 240mm, 1.0mm graduation;

►Measure the beam height on a magnetic optical platform or breadboard

►Two magnets at the bottom provide holding force for quick placement and removal;

►There is a mounting groove at the bottom for M6 fastening screws;

Description

This instrument has a simple structure and rich functions. It can be used to assist in judging the height of the optical axis of the experimental optical path, and supports the optical path of free space,
track systems and cage systems. For example, calibrate the installation verticality and plane coordinate position of a single optical-mechanical component; calibrate the mutual parallelism, verticality and optical path coaxiality of multiple optical-mechanical component keys; calibrate the installation pitch angle and yaw angle deviation of optical components.

Using this instrument to build the optical path does not need to be carried out in a fixed order, even in a compact space, it can be added or removed at any time, and the optical and mechanical components can be moved, and it will not cause the deviation of the optical axis height and the optical path coaxiality. It supports the correction of optical paths built on two or more vibration isolation platforms to the same optical axis height and maintains a high optical path coaxiality.

The laser can be adjusted in the V-shaped grooves on both sides of the body to project horizontal and vertical reference rays respectively. The laser beam is accurately calibrated to ensure that the
perpendicularity and parallelism deviation between the beam and the measurement plane is≤6°, and the zero combination gap is maintained by magnetic adsorption.

Both the instrument body and the laser are equipped with a precise scale, and the measurement data such as the height of the optical axis can be read, recorded and reproduced. The instrument adopts two fixing methods: magnetic base and hand screw, which is extremely easy to install and use. , The base is designed with magnetic adsorption, which can be directly adsorbed on the magnetic platform. If it is on a non-magnetic platform, you can use the M6 thumb screw of the base to fix it on the platform. The collimator also supports magnetic adsorption and M6 screw fixing.

The battery installation steps of the laser device:
use the attached hexagon wrench to screw the screw at the position indicated by the battery indicator icon, and then the switch tailstock can be removed. Insert the battery into the laser in the positive and negative directions as shown in the figure below, push the tailstock and tighten the screws.

Battery Installation Diagram

INFORMATION

notes for customers

PAYMENT:

----------------------Aliexpress accept above payment methods

SHIPPING:

• Item will be posted as soon as possible after payment.

• We wish the package arrives to you sooner, but international mail is highly depended on the custom and local post office, so if you don't receive your item,please connact us,thank you for you kindly understanding.

• Import duties and taxes are not included in the item price and shipping.

•  

RETURN & REFUND:

Please check the package and the items carefully. If have any problems, please feel free to contact us.

Guide for dealing with problems as follows:

FEEDBACK:

• We hope you like the item and look forward to you shopping with us again in near future.Your satisfaction,received suppirt is the most fundamental driving force us to make unremitting efforts!

• Please take a moment to give us a positive feedback, post the product image and text description you received about how you feel about the product, with an overall Detailed Sales Rating (DSR) of 5.

ATTENTION PLEASE:

• Way to communicate: Please contact us if there is any question regarding the item. We will respond your question or email in 24hours(because of the jet lag).

• Transportation problem: This is a multinational trade, such as transport processes that cause inconvenience, please understand.

• Photo Size: Please note, that the pictures are enlarged slightly for your convenience. Make sure to notice the actual size of the merchandise, as it may be smaller than the representing photo.

• Measurement error: Please allow a small measurement error.