My Store
LED-OF Series Fiber Optic Coupled Led Light Source, Multimode Fiber Optic Sma Coupled Incoherent Light Source, Adjustable Light
- Regular price
- $539.70
Fiber optic coupling LED characteristics:
► Output wavelength range:
► Provide LED with white light of 4000K and cold white light of 6200K;
► The SMA socket is very suitable for multimode fiber optic jumpers;
► The thermal performance has been optimized to achieve stable power output;
► The light source and controller are designed separately, using analog circuits with short-circuit protection function;
► Support external trigger signal synchronization control and stepless adjustment of strobe lighting brightness;
► Equipped with LEDOTB dimming controller, it supports the adjustment of light intensity for single channel LED light sources;
Fiber Optic Coupled Led Light Source Parameters |
|||
Model |
Output Wavelength (nm) |
Ø 1mm Fiber Optic Output Power |
Maximum Current |
LED-OF-MAX4K |
4000-4500K |
54mW |
1000mA |
LED-OF-MAX6K |
6000-6500K |
55mW |
1000mA |
Shell Size |
36*47.5*24.2mm (excluding base plate) |
Shell Material |
Environmentally Friendly Aluminum Parts |
Fiber Optic |
Plastics |
Fiber Length |
1m |
Joint Type |
SMA Interface |
Multimode Coupling Rate |
>90% |
Spot Shape |
Speckle Pattern |
Operation Temperature |
0℃~60℃ |
Weight |
134.9g |
Characteristics of LED Dimming Controller:
► Compact controller for adjusting the light intensity of collimated experimental LED light sources;
► Easy to use LED dimming controller with single knob operation;
► Supports dual modes of continuous constant current drive and pulse current adjustment;
► Compact in size, supporting LED light sources in the LED-OF series;
► Quick containerization with external 0-5V TTL signal for pulse width and frequency adjustment;
LED Dimming Controller Parameters |
|
Shell Size |
76.0*74.0*47.0mm |
Maximum Flash Frequency |
10kHz |
Minimum |
50μs |
Strobe |
<25μs |
Operation |
0至+40° C |
Storage |
-40~+70°℃ |
Input |
12V 稳压直流 |
Maximum |
LEDOTB-700: 12V DC |
LEDOTB-1000: 10V DC |
|
Maximum |
LEDOTB-700: 700mA |
LEDOTB-1000:1000mA |
|
Weight |
175g |
Power Supply Voltage And Current Requirements |
|||
Power Supply |
Minimum Voltage |
Ceiling Voltage |
Maximum Rated Current |
DC 12V |
+11.5V |
+12.5V |
1A |
Description
(1) Fiber optic coupling LED couples a single LED with a fiber optic through docking coupling technology, including an LED installed on a heat sink and equipped with an SMA fiber optic connector. The multimode fiber optic jumper using the SMA connector can integrate it into the optical device. In addition, hybrid jumpers can be used to transition from SMA connectors to FC/PC connectors, plug-in terminals,
or bare fiber. Fiber optic jumpers, due to their flexible characteristics, can allow the laser emitting end to move flexibly and freely, making the use of lasers more convenient.
(2) These installed fiber optic coupled LEDs have good thermal stability performance, eliminating the problem of decreased light output power caused by LED temperature rise. Each LED is designed with a strip shaped heat sink for better heat dissipation performance, which can reduce temperature by 10-15% and achieve rapid cooling. It has the characteristics of high reliability, high
stability, strong anti-interference ability, good consistency, and long service life.
Single: Fiber Optic Coupled LED , Fiber Optic Jumper
The output wavelength range of fiber coupled LED is between 400nm and 850nm, and different wavelength powers can be customized;
Controller: LED Controller, Controller Base, Power Adapter
(3) LEDOTB controller is a compact controller that adjusts the light intensity of fiber coupled LED light sources. Capable of driving LED with a maximum current of 700-1000mA. Users only need to operate a potentiometer knob with integrated switch function to continuously dim the LED light source. This controller supports continuous constant current drive mode (CW) and pulse mode (PULSE input through SMA 5V TTL signal). LEDOTB provides stable and reliable light source support for your CCD camera exposure assistance and digital microscopy imaging system.
(4) The KCH-A series communication bus and power hub are designed specifically for the operation of the Oeabt series C module controller. They simplify cable management, power links, and communication issues between multiple USB devices.
It includes a thin substrate type bracket with several inter board connection seats on its upper surface, which can hold 2/3/4 C module controllers. It includes a standard USB 3.0 hub circuit and can power up to 4 controllers with only a single power cord, as well as provide communication.
- Regular price
- $539.70
![](http://ofoptics.com/cdn/shop/products/S39885ea17e7c4168808e2e9662d39396D.webp?v=1706061277&width=1000)
![image_0](http://ofoptics.com/cdn/shop/files/S6160b5e6d86f4080a3ea17ca6fe610afS.webp?v=1706061283&width=800)
![image_1](http://ofoptics.com/cdn/shop/files/Se4246ead15a34fa392394aace751e4989.webp?v=1706061283&width=800)
![](http://ofoptics.com/cdn/shop/files/S39885ea17e7c4168808e2e9662d39396D_488134eb-c72e-468e-a883-c83a91aec37d.webp?v=1706061301&width=1000)
![](http://ofoptics.com/cdn/shop/files/Sbd1617fc6d774dceb150c913f5dc3ab8r.webp?v=1706061301&width=1000)
![](http://ofoptics.com/cdn/shop/files/S8c8760cb48484056bcc36bad0e6562ae8.webp?v=1706061301&width=1000)
![](http://ofoptics.com/cdn/shop/files/S80ffe034a48a43ddadb2582ae02c4ba89.webp?v=1706061301&width=1000)
![](http://ofoptics.com/cdn/shop/files/S6a786a0740b04bba81d767d62c28669fO.webp?v=1706061301&width=1000)
![](http://ofoptics.com/cdn/shop/files/S34700c8b30434de29bd3141419e87d9cS.webp?v=1706061301&width=1000)